Notify Message
Forums
#12894961 Dec 03, 2016 at 01:10 AM
1 Post
Hi, I am having the same starting issue as most people here are, and here's my error log for the record. I am running Vista.


PLATFORM VERSION INFO
Windows : 6.0.6002.131072 (Win32NT)
Common Language Runtime : 4.0.30319.34209
System.Deployment.dll : 4.0.30319.34280 built by: FX452RTMGDR
clr.dll : 4.0.30319.34209 built by: FX452RTMGDR
dfdll.dll : 4.0.30319.34280 built by: FX452RTMGDR
dfshim.dll : 4.0.41209.0 (Main.041209-0000)

SOURCES
Deployment url : http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application

ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application resulted in exception. Following failure messages were detected:
+ Exception reading manifest from http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application: the manifest may not be valid or the file could not be opened.
+ Deployment manifest is not semantically valid.
+ Deployment manifest identity contains missing or unsupported processor architecture.

COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.

WARNINGS
There were no warnings during this operation.

OPERATION PROGRESS STATUS
* [12/2/2016 10:04:03 PM] : Activation of http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application has started.

ERROR DETAILS
Following errors were detected during this operation.
* [12/2/2016 10:04:03 PM] System.Deployment.Application.InvalidDeploymentException (ManifestParse)
- Exception reading manifest from http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application: the manifest may not be valid or the file could not be opened.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ManifestReader.FromDocument(String localPath, ManifestType manifestType, Uri sourceUri)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Deployment.Application.InvalidDeploymentException (ManifestSemanticValidation)
- Deployment manifest is not semantically valid.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.Manifest.AssemblyManifest.ValidateSemanticsForDeploymentRole()
at System.Deployment.Application.Manifest.AssemblyManifest.ValidateSemantics(ManifestType manifestType)
at System.Deployment.Application.ManifestReader.FromDocument(String localPath, ManifestType manifestType, Uri sourceUri)
--- Inner Exception ---
System.Deployment.Application.InvalidDeploymentException (InvalidManifest)
- Deployment manifest identity contains missing or unsupported processor architecture.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.Manifest.AssemblyManifest.ValidateSemanticsForDeploymentRole()

COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

+0
#12930520 Dec 18, 2016 at 11:24 PM · Edited over 1 year ago
1 Post
This was occurring every time I tried to pull a parse, but now it's only doing it when I try to clear my log through SCM.

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at ‏‏‎‎‌‎‫‫‬‭‭‎‌‬‍‬‎‭‌‫​​‍‪‬‮.‬‮‎‬‭‫‬‫‍‏‏‮​‭​‫‬‬‏‍‍‪‭​‍‍‮‮()
at ‎‮‏​‮‫‮‍‎‭‭‏‎‪‬‭​‍‎‬‫‮.‪​‮‎‭‬‪‍‪‬‭‪‍‌‏‪‍‫‭‭‍‎‫‫‭‮(Object , EventArgs )
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
STO Combat Meter
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Stoick/AppData/Local/Apps/2.0/B48HPCAT.15R/8VPT26AO.DLM/stoc..tion_0000000000000000_0001.0000_b8551089bfe76bca/STO%20Combat%20Meter.exe
----------------------------------------
UjMbImesQvhuTpVWDanGGHDUlIwv
Assembly Version: 0.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Stoick/AppData/Local/Apps/2.0/B48HPCAT.15R/8VPT26AO.DLM/stoc..tion_0000000000000000_0001.0000_b8551089bfe76bca/STO%20Combat%20Meter.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 14.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Windows.Forms.DataVisualization
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.DataVisualization/v4.0_4.0.0.0__31bf3856ad364e35/System.Windows.Forms.DataVisualization.dll
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
ExternalLib
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Stoick/AppData/Local/Apps/2.0/B48HPCAT.15R/8VPT26AO.DLM/stoc..tion_0000000000000000_0001.0000_b8551089bfe76bca/ExternalLib.DLL
----------------------------------------
Newtonsoft.Json
Assembly Version: 7.0.0.0
Win32 Version: 7.0.1.18622
CodeBase: file:///C:/Users/Stoick/AppData/Local/Apps/2.0/B48HPCAT.15R/8VPT26AO.DLM/stoc..tion_0000000000000000_0001.0000_b8551089bfe76bca/Newtonsoft.Json.DLL
----------------------------------------
System.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
----------------------------------------
System.Runtime.Serialization
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
----------------------------------------
System.Xml.Linq
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.Linq.dll
----------------------------------------
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1636.0 built by: NETFXREL3STAGE
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1586.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
+0
#12994213 Jan 16, 2017 at 06:26 PM
1 Post
Hello, I'm new to this. Have had a long ongoing problem with use of the combat meter. I install it and must search for the combat log path manually. I locate it in the sto live logs game client folder. I set to default and run a test usually in ICA. I get results then the next time i try to test it is the same log as previous and nothing more. The only thing I know to do is delete the log but then when starting the meter again the path gives an error of being the wrong location and no matter how many times i attempt to start the program again it does not create another file. I tried making a file manually and that doesn't work either. Can someone with more experience than me help please? Thank you.
+0
#13007839 Jan 22, 2017 at 09:32 AM
DPS Operators
18 Posts
Hi,

There is an issue with uploading parses for DPSMark runs. It says that SCM needs to be updated but the current version has been installed.

Regards,

Snipey


Kind Regards,

Snipey47a
Member of the DPS Wizards of STO

+0
#13007890 Jan 22, 2017 at 10:05 AM · Edited over 1 year ago
1 Post
#13007839 Snipey47a wrote:

Hi,

There is an issue with uploading parses for DPSMark runs. It says that SCM needs to be updated but the current version has been installed.

Regards,

Snipey



Same here, was prompted to update last night and now I get the error "Please you have the most recent version of SCM installed". Which in itself is confusing since why would the most recent version cause an error? I removed , downloaded latest manually, and have 1.0.0.9c again but get error "Please you have the most recent version of SCM installed". I did notice the manual with it is for 1.0.0.9B. Thank you.

System Win 10 Pro fully updated Version 10.0.14393
+0
#13014360 Jan 24, 2017 at 08:49 PM
DPS Admins
18 Posts
#13007839 Snipey47a wrote:

Hi,

There is an issue with uploading parses for DPSMark runs. It says that SCM needs to be updated but the current version has been installed.

Regards,

Snipey



This issue should now be resolved.
+0
#13042218 Feb 05, 2017 at 12:19 PM
1 Post
Hey,

Today I tried to upload some CCA runs, without succes.
I got a message saying: "This combat does not meet the requirements for current DPS League CCA records."

Screenshots:
CCA #1
CCA #2

Are there requirements now for CCA? Or could this be a bug?
Already checked the basics, I'm on the latest version, and I am able to upload ISA records.

If needed, the log files are available here:
CCA #1
CCA #2

Thanks in advance
Statix
+0
#13063207 Feb 13, 2017 at 09:44 PM · Edited over 1 year ago
1 Post
I'm having installation problems and cannot install SCM.zip I'm running Windows 8.1 and using Chrome web browser .
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application resulted in exception. Following failure messages were detected:
+ Exception reading manifest from http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application: the manifest may not be valid or the file could not be opened.
+ Deployment manifest is not semantically valid.
+ Deployment manifest identity contains missing or unsupported processor architecture.
+0
#13073379 Feb 18, 2017 at 04:33 AM
1 Post
i am having issues with installing the software again. i had it installed when i had windows 7. when i upgraded to windows 10 the icon was still on my desktop. but it would never load when i tried to load it. it just sit and never did anything. i recently started playing again and wanted it working so i am trying to install the software again and when i try to run the setup it open IE 11 to open up some site, and it says it downloads something then goes away and never does anything. i have tried the normal things like running as admin but nothing is working. if anyone could please help that would be great
+0
#13277215 Jun 01, 2017 at 02:07 PM
DPS-30,000
1 Post
Hi. Today it seems SCM has gone 'weird', and this is even before today's patch. It parses ok, but when uploading, there is no 'response' from the other end. Normally it would say 'DPS Uploaded / Combat Time Saved' etc. However, these are blank. I checked the league table afterwards and the new parses are not there. If it helps the parses I took were for CCA. Just wondering if anyone knows if anything is happening with it? Thanks.
+0
#13279343 Jun 02, 2017 at 03:45 PM
DPS Admins
18 Posts
#13277215 ussmonkeyboy12 wrote:

Hi. Today it seems SCM has gone 'weird', and this is even before today's patch. It parses ok, but when uploading, there is no 'response' from the other end. Normally it would say 'DPS Uploaded / Combat Time Saved' etc. However, these are blank. I checked the league table afterwards and the new parses are not there. If it helps the parses I took were for CCA. Just wondering if anyone knows if anything is happening with it? Thanks.



We're looking into it. Just seems to be uploads that are down, table is still up. Pretty odd, but hopefully we'll have it taken care of soon.
+0
#13552659 Dec 03, 2017 at 07:13 AM
1 Post



DPS Meter does not count/give shield drain attacks
+0
#13785262 Jun 03, 2018 at 12:56 AM
1 Post
Combat meter has stopped working on Windows 10 ASUS ROG NVIDIA 980M GEFORCE GTX after recent update of STO Combat Meter.
The error log has been saved.

This is the log:

PLATFORM VERSION INFO
Windows : 10.0.17134.0 (Win32NT)
Common Language Runtime : 4.0.30319.42000
System.Deployment.dll : 4.7.3056.0 built by: NET472REL1
clr.dll : 4.7.3110.0 built by: NET472REL1LAST_C
dfdll.dll : 4.7.3056.0 built by: NET472REL1
dfshim.dll : 10.0.17134.1 (WinBuild.160101.0800)

SOURCES
Deployment url : http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application
Server : cloudflare
Deployment Provider url : http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application
Application url : http://www.theamateurscientist.info/parser/Application%20Files/STO%20Combat%20Meter_1_0_0_147/STO%20Combat%20Meter.exe.manifest
Server : cloudflare

IDENTITIES
Deployment Identity : STO Combat Meter.application, Version=1.0.0.147, Culture=neutral, PublicKeyToken=0000000000000000, processorArchitecture=amd64
Application Identity : STO Combat Meter.exe, Version=1.0.0.147, Culture=neutral, PublicKeyToken=0000000000000000, processorArchitecture=amd64, type=win32

APPLICATION SUMMARY
* Installable application.

ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application resulted in exception. Following failure messages were detected:
+ Exception occurred during store operation.
+ The process cannot access the file because it is being used by another process. (Exception from HRESULT: 0x80070020)

COMPONENT STORE TRANSACTION FAILURE SUMMARY
* Transaction at [6/2/2018 9:38:18 PM]
- Staging of a component file (STO Combat Meter.exe) did not succeed.
- Staging of a component (ICSharpCode.SharpZipLib.dll.genman) did not succeed.
- Staging of a component file (ICSharpCode.SharpZipLib.dll) did not succeed.
- Staging of a component (Newtonsoft.Json.dll.genman) did not succeed.
- Staging of a component file (Newtonsoft.Json.dll) did not succeed.
- Installation of deployment (http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application#STO Combat Meter.application, Version=1.0.0.147, Culture=neutral, PublicKeyToken=0000000000000000, processorArchitecture=amd64) did not succeed.
- Setting one or more of the deployment metadata did not succeed.

WARNINGS
* The manifest for this application does not have a signature. Signature validation will be ignored.
* The manifest for this application does not have a signature. Signature validation will be ignored.
* The file named STO Combat Meter.exe.manifest does not have a hash specified in the manifest. Hash validation will be ignored.
* The file named icon_kya_icon.ico does not have a hash specified in the manifest. Hash validation will be ignored.
* The file named STO Combat Meter.exe.config does not have a hash specified in the manifest. Hash validation will be ignored.
* The file named ExternalLib.dll does not have a hash specified in the manifest. Hash validation will be ignored.
* The file named STO Combat Meter.exe does not have a hash specified in the manifest. Hash validation will be ignored.
* The file named ICSharpCode.SharpZipLib.dll does not have a hash specified in the manifest. Hash validation will be ignored.
* The file named Newtonsoft.Json.dll does not have a hash specified in the manifest. Hash validation will be ignored.

OPERATION PROGRESS STATUS
* [6/2/2018 9:37:22 PM] : Activation of http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application has started.
* [6/2/2018 9:37:23 PM] : Processing of deployment manifest has successfully completed.
* [6/2/2018 9:37:23 PM] : Installation of the application has started.
* [6/2/2018 9:38:09 PM] : Processing of application manifest has successfully completed.
* [6/2/2018 9:38:14 PM] : Found compatible runtime version 4.0.30319.
* [6/2/2018 9:38:14 PM] : Request of trust and detection of platform is complete.
* [6/2/2018 9:38:18 PM] : Downloading of subscription dependencies is complete.
* [6/2/2018 9:38:18 PM] : Commit of the downloaded application has started.

ERROR DETAILS
Following errors were detected during this operation.
* [6/2/2018 9:38:18 PM] System.Deployment.Application.DeploymentException (ComponentStore)
- Exception occurred during store operation.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentStore.SubmitStoreTransaction(StoreTransactionContext storeTxn, SubscriptionState subState)
at System.Deployment.Application.ComponentStore.SubmitStoreTransactionCheckQuota(StoreTransactionContext storeTxn, SubscriptionState subState)
at System.Deployment.Application.ComponentStore.CommitApplication(SubscriptionState subState, CommitApplicationParams commitParams)
at System.Deployment.Application.SubscriptionStore.CommitApplication(SubscriptionState& subState, CommitApplicationParams commitParams)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl, Uri& deploymentUri)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivationWithRetry(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivationWithRetry(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.IO.FileLoadException
- The process cannot access the file because it is being used by another process. (Exception from HRESULT: 0x80070020)
- Source: System.Deployment
- Stack trace:
at System.Deployment.Internal.Isolation.IStore.Transact(IntPtr cOperation, StoreTransactionOperation[] rgOperations, UInt32[] rgDispositions, Int32[] rgResults)
at System.Deployment.Internal.Isolation.Store.Transact(StoreTransactionOperation[] operations, UInt32[] rgDispositions, Int32[] rgResults)
at System.Deployment.Application.ComponentStore.SubmitStoreTransaction(StoreTransactionContext storeTxn, SubscriptionState subState)

COMPONENT STORE TRANSACTION DETAILS
* Transaction at [6/2/2018 9:38:18 PM]
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: HLR288TH.B97.application
+ System.Deployment.Internal.Isolation.StoreOperationSetDeploymentMetadata
- Status: Set
- HRESULT: 0x0
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: STO Combat Meter.exe.manifest
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: icon_kya_icon.ico
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: STO Combat Meter.exe.config
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: ExternalLib.dll.genman
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: ExternalLib.dll
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: STO Combat Meter.exe.genman
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Failed
- HRESULT: 0x80070020
- File: STO Combat Meter.exe
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Failed
- HRESULT: 0x1
- Manifest: ICSharpCode.SharpZipLib.dll.genman
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Failed
- HRESULT: 0x1
- File: ICSharpCode.SharpZipLib.dll
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Failed
- HRESULT: 0x1
- Manifest: Newtonsoft.Json.dll.genman
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Failed
- HRESULT: 0x1
- File: Newtonsoft.Json.dll
+ System.Deployment.Internal.Isolation.StoreOperationInstallDeployment
- Status: Failed
- HRESULT: 0x1
- AppId: http://www.theamateurscientist.info/parser/STO%20Combat%20Meter.application#STO Combat Meter.application, Version=1.0.0.147, Culture=neutral, PublicKeyToken=0000000000000000, processorArchitecture=amd64
+ System.Deployment.Internal.Isolation.StoreOperationSetDeploymentMetadata
- Status: Failed
- HRESULT: 0x1
+ System.Deployment.Internal.Isolation.StoreTransactionOperationType (27)
- HRESULT: 0x1

+0
#13786046 Jun 04, 2018 at 04:56 AM · Edited 1 month ago
DPS Admins
31 Posts
Try uninstalling and clearing out the files for a clean install.

See post here for things to try: https://www.reddit.com/r/sto/comments/8nv1lc/unable_to_open_the_sto_combat_meter_since_the/

PM me ingame if you still have issues.
+0
#13787575 Jun 06, 2018 at 04:46 AM
DPS Admins
18 Posts
For anyone who has had issues since the recent updates, try this.

https://www.dropbox.com/s/kmt6bj49jur5rdp/SCM%20exe.zip?dl=0

Just unzip everything there into the same folder, and run it. This is the SCM.exe file itself, without the update tool.

This has resolved the issues many have had, but it comes at the cost of you needing to download the new .exe file manually from that link whenever we push out an update to SCM.

If this fails for you, just let us know.
+0